Description:
Fiber optic cable structure is a single mode or multi-mode fiber into the loose sleeve, cable core center is a non-metal reinforced piece, loose sleeve around its twisting and synthesis of compact and round cable core, cable core gap filled to prevent water compounds extruded by a layer of polyethylene inner sheath, aramid yarn armor extruded into polyethylene outer sheath cable.
Features:
Excellent mechanical and environmental performance
Good waterproof performance
Gel-filled Loose tube protect the fiber well
All dielectric material good for application in thunder area
Light weight and small diameter reducing the load caused by towers and backprops
Large span lengths and the largest span is over 1000m
Standars:
The products comply with relevant standards of YD/T,IEC and ITU.
Technical Specification
Remark:1.D is the diameter of the cable;
2.The above parameters are typical value;
3.The cable spec can be designed according to customer's requirement.
Characteristics
Can be installed without shutting off the power
1.Excellent AT performance, The maximum inductive at the operating point of AT sheath can reach 25kV
2.Light weight and small diameter reducing the load caused by ice and wind and the load on towers and back props
3.Large span lengths and the largest span is over 1000m
4.Good performance of tensile strength and temperature
5.The design life span is 30 years
Applications:
1.The actual status of overhead power lines is taken into full
consideration when ADSS cable is being designed.
2.For overhead power lines under 110kV, PE outer sheath is applied.
3.For power lines equal to or over 110kV, AT outer sheath is applied.
Optical Characteristics
| G.652 | G.655 | 50/125μm | 62.5/125μm | |
Attenuation | @850nm |
|
| ≤3.0 dB/km | ≤3.0 dB/km |
@1300nm |
|
| ≤1.0 dB/km | ≤1.0 dB/km | |
@1310nm | ≤0.36 dB/km | ≤0.40 dB/km |
|
| |
@1550nm | ≤0.22 dB/km | ≤0.23dB/km |
|
| |
Bandwidth (Class A) | @850nm |
|
| ≥500 MHz·km | ≥200 MHz·km |
@1300nm |
|
| ≥1000 MHz·km | ≥600 MHz·km | |
Numerical Aperture |
|
| 0.200±0.015NA | 0.275±0.015NA | |
Cable Cut-off Wavelength λcc | ≤1260nm | ≤1480nm |
|
| |
Technical Parameters
Ref.outer diameter | Ref.weight | Ref.daily max.working | Max allowable working tension kN | Break strength | Strength member CSA | Modulus of elasticity kN/ mm2 | Heat expansion coefficient ×10-6 /k | |
PE sheath | AT sheath | |||||||
12.5 | 125 | 136 | 1.5 | 4 | 10 | 4.6 | 7.6 | 1.8 |
13.0 | 132 | 142 | 2.25 | 6 | 15 | 7.6 | 8.3 | 1.5 |
13.3 | 137 | 148 | 3.0 | 8 | 20 | 10.35 | 9.45 | 1.3 |
13.6 | 145 | 156 | 3.6 | 10 | 24 | 13.8 | 10.8 | 1.2 |
13.8 | 147 | 159 | 4.5 | 12 | 30 | 14.3 | 11.8 | 1.0 |
14.5 | 164 | 177 | 5.4 | 15 | 36 | 18.4 | 13.6 | 0.9 |
14.9 | 171 | 185 | 6.75 | 18 | 45 | 22.0 | 16.4 | 0.6 |
15.1 | 179 | 193 | 7.95 | 22 | 53 | 26.4 | 18.0 | 0.3 |
15.5 | 190 | 204 | 9.0 | 26 | 60 | 32.2 | 19.1 | 0.1 |
15.6 | 194 | 208 | 10.5 | 28 | 70 | 33.0 | 19.6 | 0.1 |
16.3 | 211 | 226 | 12.75 | 34 | 85 | 40.0 | 20.1 | 0.1 |
16.8 | 226 | 242 | 15.45 | 41 | 103 | 48.0 | 24.0 | -0.4 |
17.2 | 236 | 253 | 16.2 | 45 | 108 | 51.0 | 25.1 | -0.5 |
17.9 | 249 | 266 | 18.0 | 50 | 120 | 58.8 | 26.1 | -0.8 |
Guangdong Juxianlan Communication Co., Ltd. Was established in 2014 and specializing in manufacturing fiber optic products and providing fiber optic solutions and engineering services in Guangdong, China.
As a professional cable manufacturer, we are committed to providing customers around the world with comprehensive products, the latest technology, and professional services to help customers to build a high-quality network platform. Combining with the actual needs of customers, we are providing individualized and comprehensive solutions to meet customers′ demands.
We offer the whole range of equipment for fiber optic, Telecom (FTTH, 4G/5G Mobile Stations, etc. ), Ethernet, and CATV network. Each unit of our products will go through 3 QC procedures: Material checking before production, stability and performance testing after production and packing checking before delivery.
Currently, most of our products have been exported to Europe, Russia, and South America. Welcome numerous agents, integrated dealers, and equipment producersall over the world to cooperate with us, to the greatest extent possible to meet your needs. 
Are you a factory or trade company?
JXL fiber is a the real factory meanwhile we are listed company
What is your main product?
Outdoor fiber optic cables; indoor fiber optic cables;FTTH Drop cables; ADSS;
Indoor armored patch cords fiber cable; Optical patch cords SC/LC/FC/ST; MTP/MPO optical patch cord.
Product quality guarantee period?
25 years' Guarantee for fiber optic cable
Do you have certificate for raw material?
We build long-term relationship cooperation with qualified ISO9001, ROHS raw material suppliers.
What is your delivery time?
Within 24 hours for 50KM normal kinds of fiber optic cable;
1 ~2 working days for fiber optic patch cords with 10000 connectors.
MOQ: what is your minimum quantity?
MOQ for fiber optic cables: 1KM
There is no MOQ required for fiber optic patch cords,as there's stock for normal kinds.
Payment
For large orders: T/T, L/C
For small orders: T/T,Western Union and Paypal are acceptable.
Shipping & Delivery
Normal orders: shipped by sea
Sample orders: by sea , by air
Welcome to Send us Inquiry on Belowing Table. Start Your Project Today.