2-12 Cores Flat Ribbon Fiber Optic Cable (GJDFBV)

Optical fiber ribbon cable is a plenum rated, single-mode or multimode 2 - 12 fiber ribbon, with a protective soft aramid strength member layer and outer jacket. Ideal for use in&n

Featured Products

Optical fiber ribbon cable is a plenum rated, single-mode or multimode 2 - 12 fiber ribbon, with a protective soft 
aramid strength member layer and outer jacket. Ideal for use in office LAN connections, patchcords and 
internal point-to-point links where frequent handling is likely (e.g. data cabinets, equipment rooms, user outlets).

 
A ribbon is comprised of 2 - 12 optical fibers coated with a dual acrylate coating system. The fibers 
are contained in a peelable UV curable matrix material, and the ribbon structure is designed to allow 
easy separation of the fibers from the matrix in preparation for splicing, or termination to a MTP 
connector.  Aramid strength members are applied between the ribbon and the extruded cable jacket 
to provide
 tensile strength to crush resistance. The specification meets UL (OFNR and OFNP) flame 
retardant rating. Available in PVC, LSZH, Plenum outer sheath and optical testing follows ITU, IEC 
and TIA/EIA-FOTP.

2-12 Cores Flat Ribbon Fiber Optic Cable (GJDFBV)
Complied With Or Exceeds Standard
.  ITU-T G652.D                                      .  ITU-T G651.1 OM1 OM2 OM3 OM4 
.  ITU-T G657.A                                      .  IEC60793-2-10  type A1a.1/A1b OM1/OM2
.  IEC60793-2-10  type A1a.2 OM3        .  IEC60793-2-10  type A1a.3 OM4
.  ISO/IEC 11801 , ISO/IEC 24702         .  IEEE 802.3z Gigabit Ethernet
.  ANSI/TIA/EIA 568C.3                          .  ROHS Compliant Directive 2011/65/EU(ROHS2.0)

 
Mechanical & Environmental Characteristics
 
ITEMValue
Max. Tensile Load (Short Term)500N
Max. Tensile Load (Long Term)100N
Max. Crush Load (Short Term)500N/100mm
Max Crush Load (Long Term)100N/100mm
UL Fire RatedOFNR
Operating Temperature-20°C to +60°C
Storage Temperature-20°C to +85°C
Sheath MaterialStandard: PVC  Optional: LSZH,PE or other
 
ANSI/TIA/EIA-598-B Standard Fiber Color Code
Fiber Number    Fiber Color    Fiber Number   Fiber Color
  Fiber 1                 Blue               Fiber 7              Red
  Fiber 2              Orange             Fiber 8             Black
  Fiber 3               Green              Fiber 9            Yellow
  Fiber 4              Brown               Fiber 10          Violet
  Fiber 5               Slate                Fiber 11           Rose
  Fiber 6              White                Fiber 12           Aqua
Fiber 13 and higher The color code is repeated with added black stripe or dash
Note: Fiber Tube color will be followed with same order.


2-12 Cores Flat Ribbon Fiber Optic Cable (GJDFBV)
Optical Characteristics 
Of all the differences between multimode & singlemode fiber, the most fundamental differences are the 
size of the fiber's core and the associated attenuation or loss and bandwidth of the fiber. The smaller the 
core diameter, the higher the fiber's bandwidth and the lower the attenuation (loss in dB per kilometer). 
The fiber's attenuation and bandwidth are also dependent on wavelength. 

 
Singlemode was for high-speed longdistance transmission and multimode (in either the 50 µm or 62.5 µm 
core diameters) was used for lower speed short distance applications. Multimode 50 µm fiber had a lower 
cost and higher modal bandwidth than multimode 62.5 µm core fiber. Bandwidth is a measurement of the 
data carrying capacity of the fiber. A higher bandwidth fiber carries more data. See table below.


 
Fiber TypeMax. Attenuation (dB/km)Min.Overfill Launch 
Bandwidth
 (Mhz.km)
Min.Gigabit Ethernet 
Link Distance
 (m)
Gigabit10Gigabit
850nm1300nm1310nm1550nm850nm1300nm850nm1300nm850nnm
OM1 62.5/125µm≤2.7≤0.6--500≥600275550-
OM2 50/125µm≤2.3≤0.6--500≥500750600150
OM3 50/125µm≤2.3≤0.6--≥1500≥5001000600300
OM4 50/125µm≤2.3≤0.6--≥3500≥5001100600550
G652D 9/125µm--≤0.30≤0.18-----
G657A 9/125µm--≤0.35≤0.21-----

Ordering Information
Part NumberOC-XX-ABCCL
 
Ordering Guide

 
XXA    B    CCL
Cable Type Jacket Fiber CountFiber Type(FXX)Jacket Color(CL)
 GJDFBV1=PVC
2=LSZH
3=PE
No. Of Fiber 
04F,12F
OM1=62.5/125 OM1
OM2=50/125 OM2
OM3=50/125 OM3
OM4=50/125 OM4
G652D=9/125 G652D
G657A=9/125 G657A
As noted in 
Color code chart

 Ordering Sample
Part NumberDescription
OC-GJDFBV-212OM3AQ12 cores Multimode OM3 GJDFBV Fiber Optic Cable, 
LSZH jacket, Aqua color.
2-12 Cores Flat Ribbon Fiber Optic Cable (GJDFBV)2-12 Cores Flat Ribbon Fiber Optic Cable (GJDFBV)2-12 Cores Flat Ribbon Fiber Optic Cable (GJDFBV)2-12 Cores Flat Ribbon Fiber Optic Cable (GJDFBV)2-12 Cores Flat Ribbon Fiber Optic Cable (GJDFBV)2-12 Cores Flat Ribbon Fiber Optic Cable (GJDFBV)

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours